ACSIM-MINI2-00

Steering controller, steering wheel, pedals, bucket seat, monitor, and PC are not included. Main unit only. (Includes a PC and a controller.
(If you would like a set including PC and controller, please contact us individually from here. We will provide a quote.)

April 25, 2022
Now compatible with Gran Turismo 7!

This product requires assembly by the customer.

From no motion to up to 8 axes
from no cylinder to 8 axes with option is now available.

• 2 axes (horizontal seat cylinder specification): 1.5 months for delivery
  
  Two cylinders are horizontally connected to the seat to achieve forward/backward movement in front/rear G and rotational movement of the seat during rear slide.
  
  

• NEW 2-axis (seat cylinder vertical specification)(Vertical seat cylinder specification) Delivery time 2 months
  
  The seat cylinder is arranged vertically and tilts back and forth with the center of the seat as the fulcrum in front-back G. In the case of left-right G, the center of the seat is used as the fulcrum. The left-right G is also expressed by tilting the seat to the left or right with the center of the seat as the fulcrum. Rear slide and other rotational movements are not supported.
  Seat rails are installed so that the seat can be adjusted forward and backward.
  A reinforcement frame is provided as standard.
  
  
• NEW 3-axis Delivery time 2 months
  
  This is a 2-axis (vertical seat cylinder specification) with rear slide expression added. The cylinder is placed horizontally behind the seat, and the seat is rotated. Seat rails are also mounted. Reinforcement frame is standard.
  
  
  
• 4-axis Delivery time 1.5 months
  
  This is a 4-axis specification of the image foot section. The entire enclosure can be floated to express roll and pitch. Since the entire chassis moves, it is recommended to purchase a monitor frame for the monitor separately.
  
  
• 6-axis (seat cylinder horizontal specification) Delivery time 1.5 months
  
  This is a 4-axis specification with 2 axes (seat cylinder horizontal specification) added.
  This is a composite representation of 2 axes (seat cylinder horizontal specification) and 4 axes.
  *Because the entire chassis moves, it is recommended that a monitor frame be purchased separately.
  
  
• NEW 6-axis (seat cylinder vertical spec.) Delivery time 2 months
  
  Enables a combined expression of 2-axis (seat cylinder vertical spec.) and 4-axis spec. Rear slide is not supported. Seat rail is mounted. Reinforcement frame is equipped as standard.
  It is recommended to purchase a monitor frame separately for the monitor since the entire chassis moves.
  
  
• NEW 7-axis Delivery time 2 months
  
  This is a 6-axis (seat cylinder vertical specification) with an additional cylinder for rear slide expression. The cylinder for rear slide is not necessary when shifting from this specification to 8-axis. If you are considering 8-axis at the same time, please upgrade from 6-axis (seat cylinder vertical specification). Reinforcing frames are provided as standard.
  *Because the entire enclosure moves, it is recommended that a monitor frame be purchased separately for the monitor.
  
  
• 8-axis (horizontal seat cylinder type) Delivery time 1.5 - 2 months
  
  This is an upgrade from 6-axis (horizontal seat cylinder type).
  It is recommended to purchase a monitor frame separately for the monitor since the entire chassis moves.
  
  
• NEW 8-axis (seat cylinder vertical specification) delivery 2 months
  
  This is an upgraded version of the 6-axis (seat cylinder vertical specification).
  The yaw direction movement such as rear slide is completely represented by the 8-axis plate, while the seat side is used to represent the driver's position. Compared to the seat cylinder horizontal specification, this specification enables 3D expressions.
  Since the entire chassis moves, it is recommended to purchase a monitor frame for the monitor separately.
  
  

New pedal plate is adopted.
FANATEC, G29, T300, T500, TGT are supported.

8-axis controller
All motion-equipped grades come with an 8-axis controller.
　There is no need to replace the controller when adding cylinders .

Adjustment function
The method of adjusting by loosening bolts has not changed, but the method of adjusting the steering position and FANATEC shifter position has been improved.

Square pipe structure designed exclusively for

Product image

Installation image of ACSIM-MINI2 controller, etc.


ACSIM-MINI2-S04 4-axis


ACSIM-MINI2-S06 6-axis


Photo shows with options installed.

A square pipe frame designed exclusively for MINI2 is used to enhance the design.

A reinforcement frame is available as an option. It can strengthen the rigidity of the shifter installation and the chassis itself.

Reinforcing frame installed image.

Seat
A full bucket seat can be installed.

The seat cylinder vertical type seat horizontal mounting plate can be mounted with the same seat, but the shape is different.

In order to achieve a realistic driving feel, we have realized "rear slide" and motion during acceleration and deceleration on two axes, which we are most particular about.